Table of Contents
Advertisement
Graphical/Softkey Interface Messages -
Unnumbered
Address range too small for request - request truncated
Cause: Too small of an address range is specified in a modify memory command.
Action: Specify a larger memory range.
Cannot create module file:
Cause: Insufficient disk space for the module file.
Action: Check disk space under /usr/hp64000.
Cannot start. Ending previous session, try again
Cause: The host system could not start a new emulation session, and is ending the
previous session.
Action: After the previous session has ended, try starting a new emulation session.
If that fails, try "emul700 -u <logical name>" to unlock the emulator and cycle
power, if needed.
Cannot start. Pod initialization failed
Cause: The host system could not start a new emulation session because it could
not initialize the emulator.
Action: Cycle power on the emulator; verify that there are no red lights on the front
of the emulator. You may need to run the Terminal Interface "pv" command to
verify that the emulator is functioning properly before starting a new session.
Configuration not valid, restoring previous configuration
Configuration not valid, restoring default configuration
Cause: The modifications you tried to make to the emulator configuration are not
valid, so the host system restored the previous configuration.
Action: See the "Configuring the Emulator" chapter for more information about the
emulator configuration items and their settings.
433
Advertisement
Table of Contents
