Main Screen > Device Setting > Configuration Setting > Set; Main Screen > Device Setting > Configuration Setting > Cancel; Main Screen > Switch Setting> > Password Change - NETGEAR ProSafe GS700TP Software User Manual

GS700TP Smart Switch Software User Manual
Main Screen > Device Setting > Configuration Setting > Set
Click 'Set' to enable new settings. You must enter your password for these settings to be accepted.
Main Screen > Device Setting > Configuration Setting > Cancel
Click 'Cancel' to abort the above settings.
Main Screen > Switch Setting> > Password Change
1. Click 'Password Change' from the Switch Setting section. The following screen pops up as
shown in Figure 3-10.
Figure 3-10
• New Password – Type any desired password. Passwords are case-sensitive and can have a
maximum of 20 characters.
• Confirm Password – Re-type the new password to confirm it.
• Old Password – The default password is 'password'.
2. Click Set to enable new password.
14
v1.0, January 2007
Smartwizard Discovery Program