NETGEAR ProSafe GS700TP Software User Manual page 42

– Test Fail – Indicates the powered device test has failed. For example, a port could not be
enabled and cannot be used to deliver power to the powered device.
– Testing – Indicates the powered device is being tested. For example, a powered device is tested
to confirm it is receiving power from the power supply.
– Searching – Indicates that the device is currently searching for a powered device. Searching is
the default PoE operational status.
– Fault – Indicates that the device has detected a fault on the powered device. For example, the
powered device memory could not be read.
6. Define the relevant fields.
7. Click . The PoE settings are saved, and the device is updated.
To modify the PoE configuration:
1. Click PoE Configuration. The PoE Configuration Page opens.
2. Click an interface. The Modify PoE Configuration Page opens:
Figure 5-8
Configuring The Device Using Your Browser
GS700TP Smart Switch Software User Manual
v1.0, January 2007
33