Defining Mac Based Access Control Lists - NETGEAR ProSafe GS700TP Software User Manual

GS700TP Smart Switch Software User Manual
To implement ACLs, first define the ACL to specify what actions should be taken when packets are received
and then specify which ports should follow these actions by binding the ACL to them.

Defining MAC Based Access Control Lists

To define MAC Based ACLs:
1. Click Security > Access Control > Define MAC ACL. The MAC Based ACL Page opens:
Figure 5-15
The MAC Based ACL Page contains the following fields:
ACL Name
– – Displays the user-defined MAC based ACLs.
Remove ACL
–
– Checked – Removes the selected MAC based ACL.
– Unchecked – Maintains the MAC based ACLs.
The ACE Table includes the following columns:
– Priority – Indicates the ACE priority, which determines which ACE is matched to a packet on a
first-match basis. The possible field values are 1-2147483647.
– Source
44
– Removes the ACLs. The possible field values are:
v1.0, January 2007
Configuring The Device Using Your Browser