Network Without Dhcp Server - NETGEAR ProSafe GS700TP Software User Manual
Smart switch
Hide thumbs
Also See for ProSafe GS700TP:
- Software administration manual (251 pages) ,
- Installation manual (41 pages) ,
- Hardware installation manual (36 pages)
Table of Contents
Advertisement
Network without DHCP Server
A static IP address can be assigned to the GS700TP device even if the network does not have a
DHCP server.
1. Connect the GS700TP switch to your existing network.
2. Power on the GS700TP switch by plugging in the power cord. The default IP is 192.168.0.239.
3. Install the Smartwizard Discovery program on your computer.
Start Smartwizard Discovery (Chapter 3 has detailed instructions on the Smartwizard
Discovery).
4. Click Discover to enable the Smartwizard Discovery to find your GS700TP switch.
5. Click Configuration Setting (See Figure 2-4).
Figure 2-4
6. Choose Disable on DHCP. See Figure 2-5.
Getting Started
GS700TP Smart Switch Software User Manual
v1.0, January 2007
7
Advertisement
Table of Contents
