NETGEAR ProSafe GS700TP Software User Manual page 61

GS700TP Smart Switch Software User Manual
2. Click on an Interface No. to define ACL Binding. The Modify ACL Binding Page opens:
Figure 5-20
The Modify ACL Binding Page contains the following fields:
– ACL Name – Contains a list of the MAC-based and IP-based ACLs, which is bound to the
interface.
– Port – Indicates the port to which the ACL is bound.
– Checked – Binds the selected ACL to the port.
– Unchecked - Releases the selected ACL from the port.
– LAGs – Indicates the LAG to which the ACL is bound.
– Checked – Binds the selected ACL to the LAG.
– Unchecked - Releases the selected ACL from the LAG.
3. Select the ACL Name and ports to be bound.
4. Click Apply. The ACL Binding is defined, and the device is updated.
52 Configuring The Device Using Your Browser
v1.0, January 2007