NETGEAR ProSafe GS700TP Software User Manual page 55
Smart switch
Hide thumbs
Also See for ProSafe GS700TP:
- Software administration manual (251 pages) ,
- Installation manual (41 pages) ,
- Hardware installation manual (36 pages)
Table of Contents
Advertisement
GS700TP Smart Switch Software User Manual
2. Click
Figure 5-16
3. Define the relevant fields.
4. Click
. The MAC based ACL is defined, and the device is updated.
5. To add a rule, click
The Add MAC Based Rule page contains the following fields:
–
ACL Name – Displays the user-defined MAC based ACLs.
–
New Rule Priority – Indicates the rule priority, which determines which rule is matched to a
packet on a firstmatch basis.
–
Source MAC Address – Matches the source MAC address to which packets are addressed to the
ACE.
–
Destination MAC Address – Matches the destination MAC address to which packets are
addressed to the ACE.
–
Source Wildcard Mask — Filters the packets by the Source wild-card mask.
46
. The Add MAC Based ACL Page opens:
. The Add MAC Based ACL page opens.
v1.0, January 2007
Configuring The Device Using Your Browser
Advertisement
Table of Contents
