NETGEAR ProSafe GS700TP Software User Manual page 87

GS700TP Smart Switch Software User Manual
2. To change the LAG settings, click on a LAG. The Modify LAG Page opens:
Figure 5-36
In addition the Modify LAG Page contains the following fields:
– LACP – Defines the LACP status.
– Admin Status – Configures port's status.
– Reactivate Suspended LAG – Reactivates a LAG if the LAG has been disabled through the
locked port security option. The possible field values are:
– Checked – Returns a suspended LAG to active status.
– Unchecked – The suspended LAG status remains unchanged.
– Operational Status – Indicates the port operational status. Possible field values are:
– Suspended – The port is in standby, and is currently not receiving or transmitting traffic.
– Active – The port is active and is currently receiving and transmitting traffic.
– Disable – The port is disabled, and is not currently receiving or transmitting traffic.
– Admin Speed – Displays the configured rate for the port. The port type determines what speed
setting options are available. Port speeds can only be configured when auto negotiation is disabled.
The possible field values are:
78 Configuring The Device Using Your Browser
v1.0, January 2007