NETGEAR ProSafe GS700TP Software User Manual page 117

GS700TP Smart Switch Software User Manual
1. Click QoS > General > CoS. The CoS Page opens:
Figure 5-57
The CoS Page contains the following:
– CoS Mode – Determines whether QoS is enabled on the device. The possible field values are:
– Enable – Enables QoS on the device.
– Disable – Disables QoS on the device.
– Trust Mode – Defines which packet fields to use for classifying packets entering the device. When
no rules are defined, the traffic containing the predefined packet CoS field is mapped according to
the relevant trust modes table. Traffic not containing a predefined packet field is mapped to best
effort. The possible Trust Mode field values are:
– CoS – Classifies traffic based on the CoS (VPT) tag value.
– DSCP – Classifies traffic based on the DSCP tag value.
– Interface – Displays the interface for which the global QoS parameters are defined.
– Port – Selects the port for which the global QoS parameters are defined.
– LAG – Selects the LAG for which the global QoS parameters are defined.
108 Configuring The Device Using Your Browser
v1.0, January 2007