Main Screen > Switch Setting > Configuration Setting - NETGEAR ProSafe GS700TP Software User Manual

GS700TP Smart Switch Software User Manual
• Subnet Mask
• Gateway
• Firmware Version
Figure 3-8
By double-clicking a listed switch, you can open the Web management for that switch.
Alternatively, you can select a switch by clicking on it once, and then clicking Web Access. For
more information on Web management, see Chapter 5.
Main Screen > Switch Setting > Configuration Setting
Select a switch by clicking on it. Then click Configuration Setting. The following screen pops up
and displays the Product Name and MAC Address. From this screen, you can modify the
following:
• IP Address – Displays the currently configured IP address.
• Subnet Mask – Displays the currently configured Subnet Mask.
12
v1.0, January 2007
Smartwizard Discovery Program