NETGEAR ProSafe GS700TP Software User Manual page 89

GS700TP Smart Switch Software User Manual
1. Click LAG Configuration > LACP. The LACP Parameters Page opens:
Figure 5-37
The LACP Parameters Page contains the following fields:
– LACP System Priority – Specifies system priority value. The field range is 1-65535. The highest
priority is 1 and the lowest is 65535. The field default is 1.
– Interface – Displays the interface number to which timeout and priority values are assigned.
– Interface Priority – Displays the LACP priority value for the interface. The field range is 1-65535.
The highest priority is 1 and the lowest is 65535. The field default is 1.
– LACP Timeout – Displays the administrative LACP timeout. The short timeout time is 3 seconds
and the long time out time is 90 seconds.
80 Configuring The Device Using Your Browser
v1.0, January 2007