NETGEAR ProSafe GS700TP Software User Manual page 97
Smart switch
Hide thumbs
Also See for ProSafe GS700TP:
- Software administration manual (251 pages) ,
- Installation manual (41 pages) ,
- Hardware installation manual (36 pages)
Table of Contents
Advertisement
GS700TP Smart Switch Software User Manual
1. Click VLAN > Voice VLAN > Properties. The Voice VLAN Properties Page opens.
Figure 5-44
The Voice VLAN Page contains the following fields:
–
Voice VLAN Status — Indicates if Voice VLAN is enabled on the device. The possible field
values are:
–
Enabled — Voice VLAN is enabled on the device.
–
Disabled — Voice VLAN is diabled on the device. This is the default value.
–
Voice VLAN ID — Displays the Voice VLAN ID number.
–
Class Of Service — Defines the CoS to which the Voice VLAN is assigned.
–
Voice VLAN Aging Time — Indicates the time after which a port is aged out and removed from
the Voice VLAN. The user can configure the Aging Time globally on the Voice VLAN.
2. Define the relevant fields.
3. Click
. The Properties fields are saved and the device is updated.
88
Configuring The Device Using Your Browser
v1.0, January 2007
Advertisement
Table of Contents
