NETGEAR ProSafe GS700TP Software User Manual page 149

GS700TP Smart Switch Software User Manual
2. Select a VLAN. The IGMP Snooping Configuration Page opens:
Figure 5-82
3. Modify the relevant fields.
4. Click . The IGMP Snooping is defined and the device is updated.
Defining Multicast Groups
The Multicast Group Page displays the ports and LAGs attached to the multicast service group in the Ports
and LAGs tables. The Port and LAG tables also reflect the manner in which the port or LAGs joined the
multicast group. Ports can be added either to existing groups or to new multicast service groups. The
Multicast Group Page permits new multicast service groups to be created. The Multicast Group Page also
assigns ports to a specific multicast service address group.
To define multicast groups:
140 Configuring The Device Using Your Browser
v1.0, January 2007