2. Click a LAG. The Modify LAG Settings Page opens:
Figure 5-34
In addition to the fields in the LAG Settings Page, the Modify LAG Settings Page contains the following
additional fields:
–
LAG Name – Displays the user-defined Lag name.
–
LACP – Enables LACP on the LAG. Link Aggregation Control Protocol automatically bundles
ports together in a LAG.
–
Link Status – Indicates whether the port is currently operational or non-operational. The possible
field values are:
–
Up – Indicates the port is currently operating.
–
Down – Indicates the port is currently not operating.
–
Admin Status – Configures the port status.
–
Reactivate Suspended Port – Reactivates a port if the port has been disabled through the locked
port security option. The possible field values are:
–
Checked – Returns a suspended port to active status.
–
Unchecked – The suspended port status remains unchanged.
Configuring The Device Using Your Browser
GS700TP Smart Switch Software User Manual
v1.0, January 2007
75