Configuring Lacp - NETGEAR ProSafe GS700TP Software User Manual

• The device supports up to eight LAGs with eight ports in each LAG.
This section includes the following sections:
•

Configuring LACP

• Viewing LAG Membership
• Configuring LACP
Defining LAG Settings
The LAG Settings Page contains fields for configuring parameters for configured LAGs. The system
supports up to 8 LAGs, and each LAG can contain up to 8 ports.
To define LAG parameters:
1. Click LAG Configuration > LAG Settings. The LAG Settings Page opens:
Figure 5-33
The LAG Settings Page contains the following fields:
– Interface – Displays the LAG number.
– LAG Description – Displays the user-defined LAG name.
Configuring The Device Using Your Browser
GS700TP Smart Switch Software User Manual
v1.0, January 2007
73