NETGEAR ProSafe GS700TP Software User Manual page 162

– Interface – Indicates the device for which statistics are displayed. The possible field values are:
– Port – Defines the specific port for which RMON statistics are displayed.
– LAG – Defines the specific LAG for which RMON statistics are displayed.
– Refresh Rate – Defines the amount of time that passes before the interface statistics are refreshed.
The possible field values are:
– No Refresh – Indicates that the RMON statistics are not refreshed.
– 15 Sec – Indicates that the RMON statistics are refreshed every 15 seconds.
– 30 Sec – Indicates that the RMON statistics are refreshed every 30 seconds.
– 60 Sec – Indicates that the RMON statistics are refreshed every 60 seconds.
– Drop Events – Displays the number of dropped events that have occurred on the interface since the
device was last refreshed.
– Received Bytes (Octets) – Displays the number of octets received on the interface since the device
was last refreshed. This number includes bad packets and FCS octets, but excludes framing bits.
– Received Packets – Displays the number of packets received on the interface, including bad
packets, Multicast, and Broadcast packets, since the device was last refreshed.
– Broadcast Packets Received – Displays the number of good broadcast packets received on the
interface since the device was last refreshed. This number does not include Multicast packets.
– Multicast Packets Received – Displays the number of good Multicast packets received on the
interface since the device was last refreshed.
– CRC & Align Errors – Displays the number of CRC and Align errors that have occurred on the
interface since the device was last refreshed.
– Undersize Packets – Displays the number of undersized packets (less than 64 octets) received on
the interface since the device was last refreshed.
– Oversize Packets – Displays the number of oversized packets (over 1518 octets) received on the
interface since the device was last refreshed.
– Fragments – Displays the number of fragments (packets with less than 64 octets, excluding
framing bits, but including FCS octets) received on the interface since the device was last
refreshed.
– Jabbers – Displays the total number of received packets that were longer than 1518 octets. This
number excludes frame bits, but includes FCS octets that had either a bad Frame Check Sequence
(FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral octet
(Alignment Error) number. The field range to detect jabbers is between 20 ms and 150 ms.
– Collisions – Displays the number of collisions received on the interface since the device was last
refreshed.
– Frames of xx Bytes – Number of xx-byte frames received on the interface since the device was last
refreshed.
2. Select an interface in the Interface field. The RMON statistics are displayed.
Configuring The Device Using Your Browser
GS700TP Smart Switch Software User Manual
v1.0, January 2007
153