NETGEAR ProSafe GS700TP Software User Manual page 164

The History Control Page contains the following fields:
– History Entry No. – Displays the entry number for the History Control Table page.
– Source Interface – Displays the interface from which the history samples were taken. The possible
field values are:
– Port – Specifies the port from which the RMON information was taken.
– LAG – Specifies the LAG from which the RMON information was taken.
– Sampling Interval – Indicates in seconds the time that samples are taken from the ports/LAGs.
The field range is 1-3600. The default is 1800 seconds (equal to 30 minutes).
– Samples Requested – Displays the number of samples to be saved. The field range is 1-65535. The
default value is 50.
– Current Number of Samples – Displays the current number of samples taken.
– Owner – Displays the RMON station or user that requested the RMON information. The field
range is 0-20 characters.
– Delete – Removes History Control entries. The possible field values are:
– Checked – Removes the selected History Control entry.
– Unchecked – Maintains the current History Control entries.
Configuring The Device Using Your Browser
GS700TP Smart Switch Software User Manual
v1.0, January 2007
155