NETGEAR ProSafe GS700TP Software User Manual page 131

GS700TP Smart Switch Software User Manual
1. Click Advanced > SNMP > Groups. The Groups Page opens:
Figure 5-68
The Groups Page contains the following fields:
– ID – Indicates the ID number.
– Group Name – Displays the user-defined group to which access control rules are applied. The field
range is up to 30 characters.
– Security Model – Defines the SNMP version attached to the group. The possible field values are:
– SNMPv1 – SNMPv1 is defined for the group.
– SNMPv2c – SNMPv2c is defined for the group.
– SNMPv3 – SNMPv3 is defined for the group.
– Security Level – Defines the security level attached to the group. Security levels apply to SNMPv3
only. The possible field values are:
– No Authentication – Indicates that neither the Authentication nor the Privacy security levels
are assigned to the group.
– Authentication – Authenticates SNMP messages and ensures that the SNMP message's origin
is authenticated.
122 Configuring The Device Using Your Browser
v1.0, January 2007