1. Click QoS > Mapping > DSCP to Queue. The DSCP to Queue Page opens:
Figure 5-63
The DSCP to Queue Page contains the following fields:
–
DSCP In – Displays the incoming packet's DSCP value.
–
Queue – Specifies the traffic-forwarding queue to which the DSCP priority is mapped. Four traffic
priority queues are supported.
–
Restore Defaults – Restores the default DSCP values to queues. The possible field values are:
–
Checked – Restores the factory DSCP values.
–
Unchecked– Maintains the current user-defined DSCP values to the queues. This is the default
value.
2. Define the relevant fields.
3. Click
. The DSCP value is mapped to a queue and the device is updated.
Configuring SNMP Security
Simple Network Management Protocol (SNMP) provides a method for managing network devices.
Configuring The Device Using Your Browser
GS700TP Smart Switch Software User Manual
v1.0, January 2007
115