Viewing Flash Logs - NETGEAR ProSafe GS700TP Software User Manual
Smart switch
Hide thumbs
Also See for ProSafe GS700TP:
- Software administration manual (251 pages) ,
- Installation manual (41 pages) ,
- Hardware installation manual (36 pages)
Table of Contents
Advertisement
Viewing Flash Logs
The Flash Logs Page contains information about log entries saved to the log file in Flash, including the time
the log was generated, the log severity, and a description of the log message. The message log (log File) is
available after reboot.
To view the message logs:
1. Click Logs > Flash Logs. The Flash Logs Page opens:
Figure 5-28
The Flash Logs Page contains the following fields:
–
ID – Displays the table entry number.
–
Log Index – Displays the log number.
–
Log Time – Displays the time at which the log was generated.
–
Severity – Displays the log severity.
–
Description – Displays the log message text.
Logs stored in flash memory are saved after device reset.
–
Clear Logs – Clears the memory Logs.
Configuring The Device Using Your Browser
GS700TP Smart Switch Software User Manual
v1.0, January 2007
65
Advertisement
Table of Contents
