Defining Trap Filter Settings - NETGEAR ProSafe GS700TP Software User Manual

Defining Trap Filter Settings

The Trap Filter Settings Page permits filtering traps based on OIDs. Each OID is linked to a device feature
or a portion of a feature. The Trap Filter Settings Page also allows network managers to filter notifications.
To define SNMP Trap Filter settings:
1. Click Advanced > SNMP > Trap Filter Settings. The Trap Filter Settings Page opens:
Figure 5-79
The Trap Filter Settings Page contains the following fields:
– Filter Name – Contains a list of user-defined notification filters.
– ID – Indicates the Trap Filter Settings Table entry number.
– Object Identifier Subtree – Displays the OID for which notifications are sent or blocked. If a filter
is attached to an OID, traps or informs are generated and sent to the trap recipients. OIDs are
selected from either the Select from field or the Object ID field.
– Filter Type – Indicates whether to send traps or informs relating to the selected OID.
– Excluded – Does not send traps or informs.
– Included – Sends traps or informs.
– Delete – The possible field values are:
Configuring The Device Using Your Browser
GS700TP Smart Switch Software User Manual
v1.0, January 2007
135