NETGEAR ProSafe GS700TP Software User Manual page 94
Smart switch
Hide thumbs
Also See for ProSafe GS700TP:
- Software administration manual (251 pages) ,
- Installation manual (41 pages) ,
- Hardware installation manual (36 pages)
Table of Contents
Advertisement
1. Click VLAN > Membership. The VLAN Membership Page opens:
Figure 5-42
The VLAN Membership Page contains the following information:
–
VLAN ID – Displays the user-defined VLAN ID.
–
VLAN Name – Displays the name of the VLAN.
–
VLAN Type – Indicates the VLAN type. The possible field values are:
–
Static – Indicates the VLAN is user-defined.
–
Default – Indicates the VLAN is the default VLAN. The default VLAN is enabled.
2. Define the membership of the ports by clicking on the box beneath the port or LAG numbers.
The status is toggled between the following values:
–
Tag egress packets (Tagged) – Indicates the interface is a tagged member of a VLAN. All packets
forwarded by the interface are tagged. The packets contain VLAN information.
–
Untag egress packets (Untagged) – Indicates the interface is an untagged VLAN member. Packets
forwarded by the interface are untagged.
–
Not member – Indicates the interface is not a member of the VLAN.
Configuring The Device Using Your Browser
GS700TP Smart Switch Software User Manual
v1.0, January 2007
85
Advertisement
Table of Contents
