NETGEAR ProSafe GS700TP Software User Manual page 106

GS700TP Smart Switch Software User Manual
1. Click Address Table > Static Addresses. The Static Addresses Page opens.
2. Select and existing IP address. The Modify Static Addresses Page opens:
GS724TP
Figure 5-52
3. Modify the relevant fields.
4. Click . The forwarding database information is modified and the device is updated.
Defining Dynamic MAC Addresses
The Dynamic Addresses Page contains parameters for querying information in the Dynamic MAC Address
Table, including the interface type, MAC addresses, VLAN, and table storing. The Dynamic MAC Address
table contains information about the aging time before a dynamic MAC address is erased and includes
parameters for querying and viewing the Dynamic MAC Address table. The Dynamic MAC Address table
contains address parameters by which packets are directly forwarded to the ports. The Dynamic MAC
Address table can be sorted by Interface, VLAN, and MAC Address.
The device shortens user wait time by providing Data Display on Demand. When the system retrieves vast
amounts of configuration data, the data is divided into groups. The system administrator can view the
configuration information either selecting a specific interface or using the Next and Back link.
To view the Dynamic MAC Address Table:
Configuring The Device Using Your Browser 97
v1.0, January 2007