NETGEAR ProSafe GS700TP Software User Manual page 98
Smart switch
Hide thumbs
Also See for ProSafe GS700TP:
- Software administration manual (251 pages) ,
- Installation manual (41 pages) ,
- Hardware installation manual (36 pages)
Table of Contents
Advertisement
Defining Voice VLAN
The Port Setup Page contains information for defining Voice VLAN ports. To define Voice VLAN settings:
1. Click VLAN > Voice VLAN > Port Setup. The Port Setup Page Opens.
Figure 5-45
The Port Setup Page contains the following fields:
–
Port — Indicates the specific interface configured with the specified modes.
–
Voice VLAN Mode — Defines the Voice VLAN mode on the port. The possible field values are:
–
Enable — This port is a candidate to join the Voice VLAN.
–
Disable — This port is not a candidate to join the Voice VLAN.
–
Voice VLAN Security — Indicates if Voice VLAN security is enabled on the port. Voice VLAN
security ensures that packets that are classified to the voice VLAN with source MAC address that is
not telephony MAC address are discarded.
–
Secure — Secure mode is enabled on the port. This is the default value.
–
Unsecure — Secure mode is disabled on the port.
–
Activated — Indicates the status of the port (activated or not).
Configuring The Device Using Your Browser
GS700TP Smart Switch Software User Manual
v1.0, January 2007
89
Advertisement
Table of Contents
