NETGEAR ProSafe GS700TP Software User Manual page 95

GS700TP Smart Switch Software User Manual
– Click
– Click
– Click
– Click
3. Click . The VLAN Membership is defined and the device is updated.
Interface PVID Settings
The Interface PVID Settings Page contains parameters for assigning Port VLAN ID (PVID) values to
interfaces. The PVID is the VLAN on which untagged incoming traffic will be forwarded. All ports must
have a defined PVID. If no other value is configured the default VLAN PVID is used. VLAN number 1 is
the default VLAN and cannot be deleted from the system.
To open the Interface PVID Settings Page:
1. Click VLAN > Interface PVID Settings. The Interface PVID Settings Page opens:
Figure 5-43
The Interface PVID Settings Page contains the following fields:
86
. All members of the VLAN are removed.
. All ports are tagged.
. All ports are untagged.
. All changes are cancelled and return to the previous settings.
v1.0, January 2007
Configuring The Device Using Your Browser