NETGEAR ProSafe GS700TP Software User Manual page 157

GS700TP Smart Switch Software User Manual
1. Click Monitor > Port Mirroring. The Port Mirroring Page opens:
Figure 5-88
The Port Mirroring Page contains the following fields:
– Destination Port – Defines the port number to which port traffic is copied.
– Source Port – Indicates the port from which the packets are mirrored.
– Type – Indicates the port mode configuration for port mirroring. The possible field values are:
– Rx – Copies traffic received by the port.
– Tx – Copies traffic transmitted by the port.
– Tx and Rx – Copies traffic both transmitted and received by the port. This is the default value.
– Status – Indicates if the port is currently monitored. The possible field values are:
– Active – Indicates the port is currently monitored.
– notReady – Indicates the port is not currently monitored.
– Delete – Removes the port mirroring session. The possible field values are:
– Checked – Removes the selected port mirroring sessions.
– Unchecked – Maintains the port mirroring session.
148 Configuring The Device Using Your Browser
v1.0, January 2007