Defining Rmon Events - NETGEAR ProSafe GS700TP Software User Manual

– CRC Align Errors – Displays the number of CRC Align errors that have occurred on the interface
since the device was last refreshed.
– Undersize Packets – Displays the number of undersized packets (less than 64 octets) received on
the interface since the device was last refreshed.
– Oversize Packets – Displays the number of oversized packets (over 1518 octets) received on the
interface since the device was last refreshed.
– Fragments – Displays the number of fragments (packets with less than 64 octets, excluding
framing bits, but including FCS octets) received on the interface since the device was last
refreshed.
– Jabbers – Displays the total number of received packets that were longer than 1518 octets. This
number excludes frame bits, but includes FCS octets that had either a bad Frame Check Sequence
(FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral octet
(Alignment Error) number. The field range to detect jabbers is between 20 ms and 150 ms.
– Collisions – Displays the number of collisions received on the interface since the device was last
refreshed.
– Utilization – Displays the percentage of the interface utilized.
2. Select a history entry number.
3. Click . The RMON history table is displayed.

Defining RMON Events

This section includes the following topics:
• Defining RMON Events Controll
• Viewing the RMON Events Logs
Defining RMON Events Control
The Events Control Page contains fields for defining RMON events.
To view RMON events:
Configuring The Device Using Your Browser
GS700TP Smart Switch Software User Manual
v1.0, January 2007
159