NETGEAR ProSafe GS700TP Software User Manual page 148

– Enabled – Enables auto learn.
– Disabled – Disables auto learn.
– Host Timeout – Indicates the amount of time host waits to receive a message before timing out.
The default time is 260 seconds.
– MRouter Timeout – Indicates the amount of the time the multicast router waits to receive a
message before it times out. The default value is 300 seconds.
– Leave Timeout – Indicates the amount of time the host waits, after requesting to leave the IGMP
group and not receiving a Join message from another station, before timing out. If a Leave Timeout
occurs, the switch notifies the multicast device to stop sending traffic The Leave Timeout value is
either user-defined, or an immediate leave value. The default timeout is 10 seconds.
2. Define the relevant fields.
3. Click . The IGMP Snooping Page is defined and the device is updated.
To modify IGMP Snooping:
1. Click Advanced > Multicast > IGMP Snooping. The IGMP Snooping Configuration Page
opens.
Configuring The Device Using Your Browser
GS700TP Smart Switch Software User Manual
v1.0, January 2007
139