NETGEAR ProSafe GS700TP Software User Manual page 120

Configuring Bandwidth Settings
The Bandwidth Page allows network managers to define the bandwidth settings for a specified interface.
Queue shaping per interface.
To define bandwidth settings:
1. Click QoS > General > Bandwidth. The Bandwidth Page opens:
Figure 5-60
The Bandwidth Page contains the following fields:
– Interface – Displays the port or LAG name. The possible field values are:
– Port No. – Indicates the port number for which the bandwidth settings are defined.
– LAG No. – Indicates the LAG numberwhich the bandwidth settings are defined.
– Ingress Rate Limit – Determines the ingress port bandwidth settings for the selected interface.
– Status – Indicates if rate limiting is defined on the interface. The possible field values are:
– Enable - Enables ingress rate limiting on the interface.
– Disable - Disables ingress rate limiting on the interface.
– Rate Limit – Indicates the Interface rate limit Value. The field range is 3500 - 1,000,000 Kbps.
Configuring The Device Using Your Browser
GS700TP Smart Switch Software User Manual
v1.0, January 2007
111