NETGEAR ProSafe GS700TP Software User Manual page 150

1. Click Advanced > Multicast > Multicast Group.The Multicast Group Page opens:
Figure 5-83
The Multicast Group Page contains the following information:
– Enable Bridge Multicast Filtering – Indicate if bridge multicast filtering is enabled on the device.
The possible field values are:
– Checked – Enables multicast filtering on the device.
– Unchecked – Disables multicast filtering on the device. If multicast filtering is disabled,
multicast frames are flooded to all ports in the relevant VLAN. Disabled is the default value.
– VLAN ID – Identifies a VLAN and contains information about the multicast group address.
– VLAN Name – Displays the user defined VLAN name.
– Bridge Multicast Address – Identifies the multicast group MAC address/IP address.
– Delete – The possible field values are:
– Checked – Deletes the Vlan ID from the multicast group.
– Unchecked – Maintains the list of Vlan IDS.
– Ports – Ports that can be added to a multicast service.
– Interface Status – Indicates the interface status. The possible field values are:
Configuring The Device Using Your Browser
GS700TP Smart Switch Software User Manual
v1.0, January 2007
141