NETGEAR ProSafe GS700TP Software User Manual page 46

– Enable – Enables using a Guest VLAN for unauthorized ports. If a Guest VLAN is enabled,
the unauthorized port automatically joins the VLAN selected in the VLAN List field.
– Disable – Disables Guest VLAN option. This is the default.
– VLAN List – Contains a list of VLANs. The Guest VLAN is selected from the VLAN list.
2. Define the relevant fields.
3. Click . The network authentication properties are set and the device is updated.
Defining Port Authentication
The Port Authentication Page allows network managers to configure port-based authentication global
parameters.
To define the port-based authentication global properties:
1. Click Security > Port Authentication > Port Authentication. The Port Authentication Page
opens.
Figure 5-10
The Port Authentication Page contains the following fields:
– ID – Displays a list of interfaces on which port-based authentication is enabled.
Configuring The Device Using Your Browser
GS700TP Smart Switch Software User Manual
v1.0, January 2007
37