NETGEAR ProSafe GS700TP Software User Manual page 64

– Discard – Discards packets from any unlearned source. This is the default value.
– Shutdown – Discards packets from any unlearned source and shuts down the port. The port
remains shut down until reactivated or until the device is reset.
– Trap – Enables traps when a packet is received on a locked port. The possible field values are:
– Checked – Enables sending a trap when a packet is received on a Locked port.
– Unchecked – Disables sending a trap when a packet is received on a Locked port.
– Trap Frequency (Sec) – The amount of time (in seconds) between traps. The default value is 10
seconds.
2. Click an interface you want to modify. The Modify Port Security Page opens:
Figure 5-22
In addition to the fields in the Port Security Page, the Modify Port Security Page contains the following
fields:
– Interface – Displays the port or LAG name. The possible field values are:
– All Ports – Indicates the enabled ports.
– All LAGs – Indicates the enabled LAGs.
Configuring The Device Using Your Browser
GS700TP Smart Switch Software User Manual
v1.0, January 2007
55