Configuring Ip Interfaces - NETGEAR ProSafe GS700TP Software User Manual

Configuring IP Interfaces

The IP Interface Page contains fields for assigning the IP address of the switch. The IP address may either
be statically defined or may be retrieved using the Dynamic Host Configuration Protocol (DHCP). The IP
Interface Page also contains information for defining the default gateway. When using DHCP, network
devices can have a different IP address every time the device connects to the network.
Note the following when configuring IP Addresses:
• If the device was accessed using the Smartwizard Discovery, the IP address retrieved through DHCP is
displayed.
• If the device fails to retrieve an IP address through DHCP, the default IP address is 192.168.0.239.
To define the IP interface:
1. Click IP Interface. The IP Interface Page opens:
Figure 5-49
The IP Interface Page contains the following fields:
– Get Dynamic IP from DHCP Server – Retrieves the IP addresses using DHCP.
– Static IP Address – The IP Address is set manually.
– IP Address – Displays the currently configured IP address.
Configuring The Device Using Your Browser
GS700TP Smart Switch Software User Manual
v1.0, January 2007
93