NETGEAR ProSafe GS700TP Software User Manual page 140

– Notification Version – Displays the trap type. The possible field values are:
– SNMP V1 – Indicates that SNMP Version 1 traps are sent.
– SNMP V2c – Indicates that SNMP Version 2 traps are sent.
– UDP Port – Displays the UDP port used to send notifications. The default is 162.
– Filter Name – Indicates if the SNMP filter for which the SNMP Notification filter is defined.
– Timeout – Indicates the amount of time (in seconds) the device waits before re-sending informs.
The default is 15 seconds.
– Retries – Indicates the amount of times the device re-sends an inform request. The default is 3
seconds.
– Delete – Removes the currently selected recipient. The possible field values are:
– Checked – Removes the selected recipient from the list of recipients.
– Unchecked – Maintains the list of recipients.
SNMPv3 Notification Recipient
The SNMPv3 Notification Recipient table contains the following fields:
– ID – Indicates the ID number.
– Recipient IP – Displays the IP address to which the traps are sent.
– Notification Type – Displays the type of notification sent. The possible field values are:
– Traps – Indicates that traps are sent.
– Inform – Indicates that informs are sent.
– User Name – Displays the user to which SNMP notifications are sent.
– Security Level – Displays the means by which the packet is authenticated. The possible field
values are:
– No Authentication – Indicates that the packet is neither authenticated nor encrypted.
– Authentication – Indicates that the packet is authenticated.
– privacy – Indicates that the packet is encrypted
– UDP Port – The UDP port used to send notifications. The field range is 1-65535. The default is
162.
– Filter Name – Includes or excludes SNMP filters.
– Timeout – Indicates the amount of time (seconds) the device waits before resending informs. The
field range is 1-300. The default is 15 seconds.
– Retries – The amount of times the device resends an inform request. The field range is 1-255. The
default is 3.
– Delete – Removes the currently selected recipient. The possible field values are:
– Checked – Removes the selected recipient from the list of recipients.
Configuring The Device Using Your Browser
GS700TP Smart Switch Software User Manual
v1.0, January 2007
131