Introduction
This section describes setting browser interface options and using the GS700TP switch's home page. It
includes the following sections:
•
Opening the NETGEAR GS700TP Home Page
•
Understanding the Home Page
•
Using The NETGEAR Web Management System Buttons
Opening the NETGEAR GS700TP Home Page
The NETGEAR GS700TP switch home page can be accessed from any PC with a web browser.
To start the NETGEAR application:
1. Open a web browser.
2. Enter the device IP address in the address bar.
3. Press Enter. The Logon Page appears.
Figure 5-1
Configuring The Device Using Your Browser
GS700TP Smart Switch Software User Manual
v1.0, January 2007
21