NETGEAR ProSafe GS700TP Software User Manual page 155
Smart switch
Hide thumbs
Also See for ProSafe GS700TP:
- Software administration manual (251 pages) ,
- Installation manual (41 pages) ,
- Hardware installation manual (36 pages)
Table of Contents
Advertisement
GS700TP Smart Switch Software User Manual
1. Click File Management > File Download to Switch. The File Download to Switch Page
opens:
Figure 5-87
The File Download to Switch Page contains the following sections:
•
Firmware Download to Switch
•
Configuration Download to Switch
Firmware Download to Switch
The Firmware section contains the following fields:
–
Server IP Address – Specifies the TFTP Server IP Address from which files are downloaded to
the switch.
–
Source File Name– Specifies the source from which the files are downloaded to the switch.
–
Source File Type – Specifies the source type from which files are downloaded to the switch. The
possible field values are:
–
Software Image – Downloads the Image file. The downloaded image used only after the device
is rebooted.
146
Configuring The Device Using Your Browser
v1.0, January 2007
Advertisement
Table of Contents
