Appendix A Default Settings - NETGEAR ProSafe GS700TP Software User Manual

GS700TP Smart Switch Software User Manual
This appendix provides default settings for the NETGEAR Model GS700TP Smart Gigabit
Ethernet Switch. You can always configure the switch to default settings by using the Factory
Reset function from a web browser.
Table 1: Default Settings
Feature
Port Speed
Port Duplex
Flow Control (half duplex)
Flow Control (full duplex)
IP Configuration
Password
VLAN
Link Aggregation (Trunk)
Traffic Prioritization (QoS)
1
GS700TP Default Setting
Auto-negotiation
Auto-negotiation
Enabled
Enabled
DHCP enabled
password
802.1q based VLAN
Disabled
Optimized for flow control, all ports set normal priority
v1.0, January 2007
Appendix A
Default Settings
Default Settings