NETGEAR ProSafe GS700TP Software User Manual page 152
Smart switch
Hide thumbs
Also See for ProSafe GS700TP:
- Software administration manual (251 pages) ,
- Installation manual (41 pages) ,
- Hardware installation manual (36 pages)
Table of Contents
Advertisement
Configuring Multicast Forward All
The Bridge Multicast Forward All page contains fields for attaching ports or LAGs to a device that is
attached to a neighboring multicast router/switch. Once IGMP Snooping is enabled, multicast packets are
forwarded to the appropriate port or VLAN. Unless LAGs are defined, only a Multicast Forward All table
displays.
To define Multicast forward all settings:
1. Click Advanced > Multicast > Multicast Forward All. The Multicast Forward All Page
opens:
Figure 5-85
The Multicast Forward All Page contains the following fields:
–
VLAN ID – Displays the VLAN for which multicast parameters are displayed.
–
VLAN Name – Displays the user defined VLAN name.
–
Ports – Displays the interface for which the multicast parameters on the device is defined.
–
Interface Status – Indicates the interface status. The possible field values are:
–
Static – Attaches the port to the multicast router or switch as a static port.
Configuring The Device Using Your Browser
GS700TP Smart Switch Software User Manual
v1.0, January 2007
143
Advertisement
Table of Contents
