Configuring Voice Vlan - NETGEAR ProSafe GS700TP Software User Manual

– Interface – Displays the interface to which the PVID tag is assigned. The possible field values are:
– Port – Displays the port to which the PVID tag is attached.
– LAG – Displays the LAG to which the PVID tag is attached.
– PVID – Displays the PVID value. The possible field range is 1-4095.
2. Enter the PVID for the corresponding interfaces.
3. Click . The PVID settings are saved and the device is updated.

Configuring Voice VLAN

Voice VLANs allows network administrators enhance VoIP service by configuring access ports to carry IP
voice traffic from IP phones on a specific VLAN. Network Administrators can configure a Voice VLAN on
which voice IP traffic is forwarded allowing the configuration of appropriate QoS setting, ensuring that the
quality of sound does not deteriorate if the IP traffic is received unevenly.
This section contains the following topics:
• Viewing Voice VLAN
• Defining Voice VLAN
• Viewing OUIs Properties
• Adding OUI Entries
Viewing Voice VLAN
The Voice VLAN Properties Page contains information about the Voice VLAN status.
To view Voice VLAN properties:
Configuring The Device Using Your Browser
GS700TP Smart Switch Software User Manual
v1.0, January 2007
87