NETGEAR ProSafe GS700TP Software User Manual page 147
Smart switch
Hide thumbs
Also See for ProSafe GS700TP:
- Software administration manual (251 pages) ,
- Installation manual (41 pages) ,
- Hardware installation manual (36 pages)
Table of Contents
Advertisement
GS700TP Smart Switch Software User Manual
1. Click Advanced > Multicast > IGMP Snooping. The IGMP Snooping Page opens:
Figure 5-81
The IGMP Snooping Page contains the following fields:
–
Enable IGMP Snooping Status – Indicates if IGMP Snooping is enabled on the device. IGMP
Snooping can be enabled only if Bridge Multicast Filtering is enabled. The possible field values
are:
–
Checked – Enables IGMP Snooping on the device.
–
Unchecked – Disables IGMP Snooping on the device.
–
VLAN ID – Specifies the VLAN ID.
–
IGMP Snooping Status – Indicates if IGMP snooping is enabled on the VLAN. The possible field
values are:
–
Enabled – Enables IGMP Snooping on the VLAN.
–
Disabled – Disables IGMP Snooping on the VLAN.
–
Auto Learn – Indicates if Auto Learn is enabled on the device. If Auto Learn is enabled, the
devices automatically learns where other multicast groups are located. Enables or disables Auto
Learn on the Ethernet device.The possible field values are:
138
Configuring The Device Using Your Browser
v1.0, January 2007
Advertisement
Table of Contents
