NETGEAR ProSafe GS700TP Software User Manual page 40

Figure 5-7
The PoE Configuration Page contains the following fields:
– Power Status – Indicates the online power source status. The possible field values are:
– On – Indicates that the power supply unit is functioning.
– Off – Indicates that the power supply unit is not functioning.
– Faulty – Indicates that the power supply unit is functioning, but an error has occurred. For
example, a power overload or a short circuit.
– Nominal Power – Indicates the actual amount of power the device can supply. The field value is
displayed in Watts.
– Consumed Power – Indicates the amount of the power used by the device. The field value is
displayed in Watts.
– System Usage Threshold – Indicates the percentage of power consumed before an alarm is
generated. The field value is 1-99 percent. The default is 95 percent.
– Traps – Indicate if PoE device traps are enabled. The possible field values are:
– Enable – Enables PoE traps on the device.
Configuring The Device Using Your Browser
GS700TP Smart Switch Software User Manual
v1.0, January 2007
31