Empty The Waste Toner Bottle; Check Wall Clearance And Clean/Replace; Very Important - Canon imageRUNNER ADVANCE C7580i II Advance Maintenance Manual

iRADV C7580i/C7570i/C7565i Advance Maintenance Guide
Procedure
M11
Empty the Waste
Toner Bottle
For
C7500
iRADVC7200/C9200/
series
Service mode counter no
longer needs to be reset.
M12

Very Important!

Check Wall Clearance
and Clean/Replace
Filters
Detail
Check
Check
Clean
Replace
Note
Point:
1.Empty the Waste Toner Bottle into the Toner
Waste Bag (Supply # : 18X24-1.5MIL)
2.Do Not empty the waste toner into a trash can
without a bag
See TP10 371a for information regarding allowing
the customer to empty the Toner Waste Bottle
TP10 035b
COPIER>ADJUST>MISC>WT-FL-LM set to 2.
Update: Setting should be changed to 3
For ADV7000/9000 series:
COPIER>FUNCTION>CLEAR>W-TN-CLR
COPIER>FUNCTION>MISC-P>WTN-OFST
ADVC7500
For ADVC7200/9200 &
COPIER>COUNTER>DRBL-1/WST-TNR
automatically clears when PS112 changes state.
Very Important!
After emptying out the waste toner, remove
the prism section from the waste toner
bottle and clean the area around the prism
and itself before putting it back together.
Point:
To Prevent Developing Assembly Failures:
1.Make sure the back of the machine is at least 4
Inches from the wall
2.Remove the Filter Cover(1) and clean/replace
Ozone Filters(3) and all Dust Filters (2) and(4)
(2)Filter, Air FL0-7931-000
(3)Filter, Ozone FL0-7930-000
(4)Filter, Dust FL2-0439-000
Verify Filters are in correct orientation. Cross side up
and Large Foam around sides makes seal.
Time
Check
1
min
series:
Check
1
min
Clean
5
min
Replace
5
min