Operating the Software
10.6 Output Flags
10.6
Output Flags
Output flags are symbols that are encountered on the left hand side of the assignment "="
operator. They direct the result of the input expression towards an output purpose.
Output flags are identified by <variable>_O.
Output flags represent items such as:
• digital outputs
• system control switches.
Perfect Harmony drives have a set of pre-defined symbols that describe control outputs or
"switches" that can be controlled by the SOP. These switches can control functions such as the
source of the speed reference, a selection for the system acceleration rate and many more. In
most cases, to cause the system to perform in the intended manner, the proper control switches
must be set, and others cleared, by the SOP.
436
NXGPro+ Control Manual
Operating Manual, A5E50491925A