Siemens SINAMICS PERFECT HARMONY GH180 Function Manual page 409

Rollback [RLBK] Mode
The following figure depicts the display in rollback mode.
Figure 9-60
The KYPD field displays the current operational mode of the system.
This field can have any one of the displays summarized in Table Line 2 of mode display
depending on the current operational mode or the current state of the drive.
Regeneration [RGEN] Mode
The following figure depicts the display in regeneration mode.
Figure 9-61
Modifying Parameter Values
The following sections illustrate the steps to take if attempting to locate and change the
following parameters:
• Ratio Control
• Motor Frequency
Example for changing ratio control parameters:
The metering display shows the commanded speed reference in percent.
NXGPro+ Control Manual
Operating Manual, A5E50491925A
Dynamic Programmable Meter Display in Rollback Mode
Dynamic Programmable Meter Display in Regeneration Mode
Software user interface
9.6 ML Keypad
407