Enter/Cancel Key - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

Software user interface
9.1 SIMATIC Keypad
Note
Editing parameter values
When editing parameter values, you must use all four digit fields by using a zero where
appropriate.
For example, to change the value of a four digit parameter from 1234 to 975, enter 0975.
Note
Signed parameters
For signed parameters, i.e. parameter values that can be either positive or negative, the first
active digit is the sign of the value.
To change the sign of a value:
• Use the up and down arrow keys. The active "digit" is the left most position and is underlined.
Either a "+" or a "-" is displayed during the editing process.
• Press [ENTER] to accept the new value.
When not being edited, positive values are displayed without the "+" sign. Negative values
always show the "-" sign unless the negative sign is implied in the parameter name itself.
9.1.8

Enter/Cancel Key

The [ENTER] key is located to the bottom left of the numeric keys.
Its function is similar to the [ENTER] key on a standard PC keyboard.
The [ENTER] key is used to choose or accept a selection or confirm an operation.
For example: after locating and displaying a parameter within the menu structure, use the
[ENTER] key to edit the parameter's value.
Common functions of the [ENTER] key include:
• selecting a submenu
• entering edit mode for a selected parameter value
• accepting a new parameter value after editing
• initiating a function within the menu system
Use the [SHIFT] key with the [ENTER] key as a cancel function. The secondary function [CANCEL]
is listed on the lower portion of the [ENTER] key.
Common functions of the [CANCEL] key include:
• aborting the current operation
• returning to the previous menu display.
• rejecting any modifications to a parameter value in edit mode.
348
NXGPro+ Control Manual
Operating Manual, A5E50491925A