Siemens SINAMICS PERFECT HARMONY GH180 Function Manual page 117

Parameter ID
Int Analog Out5 2661
Int Analog Out6 2669
Table 6-24 Internal I/O Module 4 (2809) Parameters
Parameter ID
Module Type 2804
Voltage 2564
Int Analog In10 2721
Int Analog In11 2725
Int Analog In12 2731
Int Analog Out7 2677
Int Analog Out8 2685
NXGPro+ Control Manual
Operating Manual, A5E50491925A
Unit Default Min
Submenu
Submenu
Unit Default Min
0 0
V 120 -200
Submenu
Submenu
Submenu
Submenu
Submenu
Parameter Assignment/Addressing
6.6 Options for Drive Menu (2) - second part
Max Description
Access the setup menu for internal analog out‐
put 5.
See Table Internal Analog Output 5 Menu
(2661).
Access the setup menu for internal analog out‐
put 6.
See Table Internal Analog Output 6 Menu
(2669).
Max Description
2 Set the type for internal I/O module 4. 0 = no
module installed.
200 Set the required module voltage. Possible op‐
tions are:
• 24 V
• 120 V
Access the setup menu for internal analog in‐
put 10.
See Table Internal Analog Input 10 Menu
(2721).
Access the setup menu for internal analog in‐
put 11.
See Table Internal Analog Input 11 Menu
(2725).
Access the setup menu for internal analog in‐
put 12.
See Table Internal Analog Input 12 Menu
(2731).
Access the setup menu for internal analog out‐
put 7.
See Table Internal Analog Output 7 Menu
(2677).
Access the setup menu for internal analog out‐
put 8.
See Table Internal Analog Output 8 Menu
(2685).
115