Uploading The Sop - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

Operating the Software

10.8 Uploading the SOP

10.8 Uploading the SOP
The need may arise to view and/or modify the installed SOP file. This is done by communications
from the drive to an external PC, and is known as uploading. The tools for uploading the SOP are
contained in the Siemens ToolSuite of tools.
The SOP is uploaded to the DCR via Tool Suite - Drive Tool via Ethernet.
Uploading the SOP via serial Ethernet connection
Use the Drive Tool to upload the SOP via the Ethernet connection. Once a connection with the
drive is established, select the Upload System Program function from the Configuration Menu.
Refer to the NXGPro+ ToolSuite Software Manual (A5E03086439) for details about the Drive
Tool.
438
NXGPro+ Control Manual
Operating Manual, A5E50491925A