Options For Communications Menu (9) - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

6.18

Options for Communications Menu (9)

NOTICE
IP Address Duplication
Duplicating IP addresses will cause unintended communication issues that will lead to incorrect
drive operation.
To avoid duplication of IP addresses, ensure that the IP addresses of the drive and the PC are NOT
the same before connecting an external PC to the Ethernet connection of the drive.
Note
Changing Drive Parameters
Only Siemens trained personnel are authorized to change drive parameters.
Familiarize yourself with the safety notes in Section Safety Notes for Parameter Changes and
preferentially contact Siemens customer service before changing the default configuration.
The Communications Menu (9) consists of the following menu options:
• Network Control (9943)
• Network 1 Configure (9900)
• Network 2 Configure (9914)
• SOP Functionms (9110)
• TCP/IP (9300)
These menus are explained in the tables that follow.
Table 6-98 Communications Menu (9) Parameters
Parameter ID
Serial port setup 9010
Network Control 9943
Network 1 Configure 9900
Network 2 Configure 9914
Fast Access Enable 9971
(Not Available)
NXGPro+ Control Manual
Operating Manual, A5E50491925A
Unit Default Min
Submenu
Submenu
Submenu
Submenu
Off
6.18 Options for Communications Menu (9)
Max Description
Access serial port setup parameters. See Table Serial Port
Setup Menu (9010).
Refer to the NXGPro+ Communications Manual.
(A5E50226719)
Enable fast access fo two consecutive registers for PLC
Control.
*
Parameter Assignment/Addressing
167