Options For Log Control Menu (6) - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

6.15

Options for Log Control Menu (6)

Note
Changing Drive Parameters
Only Siemens trained personnel are authorized to change drive parameters.
Familiarize yourself with the safety notes in Section Safety Notes for Parameter Changes and
preferentially contact Siemens customer service before changing the default configuration.
The Log Control Menu (6) consists of the following menu options:
• Event Log Menu (6180)
• Alarm/Fault Log Menu (6210)
• Historic Log Menu (6250)
These menus are explained in the tables that follow.
Table 6-84 Log Control Menu (6) Parameters
Parameter
Upload all logs
Event Log
Alarm/Fault Log
Historic Log
Table 6-85 Event Log Menu (6180) Parameters
Parameter
Upload event log
Table 6-86 Alarm/Fault Log Menu (6210) Parameters
Parameter
Alarm/Fault log display
Alarm/Fault log upload
Alarm/Fault log clear
NXGPro+ Control Manual
Operating Manual, A5E50491925A
ID Unit Default
6150 Function
6180 Submenu
6210 Submenu
6250 Submenu
ID Unit Default
6190 Function
ID Unit Default
6220 Function
6230 Function
6240 Function
6.15 Options for Log Control Menu (6)
Min Max Description
Upload all logs (event, fault, historic), parameter
dump, and active SOP hex file to a USB connected
disk drive.*
Access menu for event log. See Table Event Log
Menu (6180).
Access menu for alarm/fault log. See Table Alarm/
Fault Log Menu (6210).
Access menu for historic log. See Table Historic
Log Menu (6250).
Min Max Description
Upload the event log to a USB connected disk
drive.*
Min Max Description
Display the fault log.
Upload the fault log to a USB connected disk
drive.*
Clear the fault log.
Parameter Assignment/Addressing
155