Siemens SINAMICS PERFECT HARMONY GH180 Function Manual page 141

• 0 to 10 V
• -10 V to +10 V (Note: This option is not allowed to be selected if the analog source is one of
the internal I/O inputs.)
Define the minimum and maximum values for scaling, and the loss of signal (LOS) threshold and
action.
Table 6-63 Analog Input #1 Menu (4100) Parameters
Parameter ID
Source 4105
Type 4110
Min input 4120
Max input 4130
Loss point threshold 4140
Loss of signal action 4150
Loss of signal set‐ 4160
point
NXGPro+ Control Manual
Operating Manual, A5E50491925A
Unit Default Min
Off
4–20 mA
% 0.0 -300.0 300.0
% 100.0 -300.0 300.0
% 15.0 0.0
Preset
% 20.0 -200.0 200.0
Parameter Assignment/Addressing
Max Description
Set the input source for analog input 1:
• Off
• Ext 1 to 24
• Int 1 to 12
See Table Pick list for Analog Input Sources.
Set the operational mode for analog input 1:
• 0 to 20 mA
• 4 to 20 mA
• 0 to 10 V
• -10 V to +10 V (Note: This option is not allowed
to be selected if the analog source is one of the
internal I/O inputs.)
Minimum analog input.
Maximum analog input.
100.0 Threshold where loss of signal action is activated.
Enter as a percentage of upper range for any type.
Select loss of signal action:
• Preset
• Maintain
• Stop
Loss of signal preset speed.
6.11 Options for Auto Menu (4)
139